New Intrinsically Safe Reference Pressure Recorder

28-01-2011

Not just a new pressure calibrator or a new pressure recorder. It’s a field calibrator!

nVision from Crystal Engineering Corporation is not just a new pressure calibrator or a new pressure recorder. It’s a field calibrator that can display recorded data graphically on a high resolution screen. 

 

No need to stop a test to analyze data on a PC. Stored data, or data being recorded can be displayed graphically, with the ability to zoom into specific events, or zoom out to get a big picture of your test. There's never been anything like this!

A special nVision feature is the option to identify each recording with a custom run tag, instead of identifying each data set by only its date and time. The run tags appear alongside each data set in CrystalControl's DataViewer and in exports to Excel.

  • Pressure accuracy to 0.025% of reading
  • Field-replaceable modules: pressure, temperature, current and voltage
  • Temperature compensation from -20°C to +50°C
  • ATEX/IECEx intrinsically safe
  • Log and display 500,000 points at up to 10 readings/sec on up to two modules simultaneously
  • IP67 (1 meter submersion for 30 minutes)
  • Uses the new CPF hose and fitting system (leak-free and finger tight to 10K PSI)
  • Analyze live data graphically - no PC required.
  • Connect to a PC to download stored data or view live readings without stopping datalogging

 

Applications

  • Calibrate pressure transducers, switches, transmitters and gauges
  • Calibrate natural gas correctors and flow computers
  • Pressure relief valve testing
  • Field datalogging of pressure and temperature
  • Record water hammer events
  • Leak testing with simultaneous graphing of pressure and temperature
  • Temperature monitoring and recording
  • Pass/fail events for pressure bearing vessels such as gas cylinder, flow meter, etc.

 

HYTOR A/S is the Danish distributor of Crystal Engineering's pressure measuring equipment.

If you do not need a field calibrator at regular intervals, it might be a better solution to rent one. HYTOR has a wide range of rental equipment, e.g. nVision with 30 bar, 700 bar pressure modules, and voltage and temperature modules.

 

For further information please contact HYTOR A/S

Jesper Bjerre Lauridsen, Market manager Process Engineering

Tel +45 7614 1900, jbl@hytor.dk 

 

or click Process Tech - Gauges / Thermometres for more details.

<- Back to: News