LIQUIfit fittings from Parker-Legris

09-10-2009

HYTOR introduces leak-free push-to-connect fittings from Parker-Legris: threaded fittings, tube to tube fittings, advanced PE fittings, accessories, etc.

LIQUIFIT offers:

  • The most compact profile on the market

  • EPDM patented sealing technology

  • Full flow

  • Less wear-and-tear on all components

  • 100% bio-based material

 

LIQUIfit fittings suitable for:

  • water, potable liquids, neutral gases

For use with chemicals or other potentially aggressive liquids, contact HYTOR’s department for pneumatics.

 

Working pressure and temperature:

  • 1/4: 230 psi from 35°F to 100°F, 150 psi at 150°F, 60 psi at 200°F
  • 3/8: 190 psi from 35°F to 100°F, 100 psi at 150°F, 60 psi at 200°F
  • 1/2: 160 psi from 35°F to 100°F, 100 psi at 150°F, 60 psi at 200°F

For use with chemicals or other potentially aggressive liquids, contact HYTOR’s department for pneumatics.

 

Maximum torquevalues for plastic threads NPT:

  • 1/8 and 1/4: 1.0 ft Ibs / 1.5 Nm
  • 3/8 and 1/2: 2.2 ft Ibs / 3.0 Nm

For use with chemicals or other potentially aggressive liquids, contact HYTOR’s department for pneumatics.

 

For further information contact

HYTOR A/S – Pneumatics, Torben Knudsen , tlf. 7614 1900

 

<- Back to: News